Clean-Up Room - Shared, 15m2

Print
Edit it in Health Facility Briefing System (HFBS)
Edit this room data or print a PDF using the HFBS - Health Facility Briefing System. Customise this room data for your project, or add it to an existing health facility brief in HFBS Briefing Module. Open HFBS
Room Layout Sheet
Download a PDF Room Layout Sheet (RLS) for this standard component. Free View
Room Code CLUP-15-I
Net Room Area Briefed 15
Hours of Operation 24 Hours
Occupancy 1 - 2
Description / Special Requirements The Clean-Up Room, Shared is used for rinsing and cleaning of medical equipment or endoscopes used in the Operating Rooms or Procedure Rooms. Low temperature sterilisation of endoscopes may also be undertaken in this room. The shared Clean-up Room should be located between two Minor Operating Rooms or Procedures rooms where endoscopy procedures are undertaken.
Amendment 24.10.10, - First Draft 06.05.11, - FE updated
ID Fabric Material Finish Specification Selection Remarks
1020 Floor finish Vinyl, non-slip Safety Seamless, coved
2000 Skirting Vinyl Prefinished Floor vinyl coved, 150mmH
3000 Wall finish Paint Acrylic, washable
3052 Wall finish Vinyl Prefinished Wall vinyl to 1500mm AFFL
8010 Door protection Composite Prefinished PVC Protection plate to 900 AFFL
8040 Door protection Composite Prefinished PVC To door frame
9004 Doors Solid Core/ Glass Paint Single leaf, observation panel 1100 mm clear opening to ORs, double swing, sliding cover to observation panel
6025 Cornice Aluminium Powdercoat shadow line
5023 Ceiling Plasterboard Prefinished Water resistant, drop in tiles, 600x1200
ID Description Category Group Qty Selection / Remarks
150 Air flowmeter Furniture/ Fitting 3 1 for tube drying
1010 Bench: stainless steel Metalwork 1 2 with wet edge, 1 with inset sinks
4430 Cupboard: drawer unit Furniture/ Fitting 1 1 under dry bench
4460 Cupboard: wall mounted Furniture/ Fitting 1 1 over dry bench
6152 Dispenser: disposable glove Furniture/ Fitting 2 1
6154 Dispenser: paper/ hand towel Furniture/ Fitting 2 1 to basin
6156 Dispenser: soap Furniture/ Fitting 2 1 to basin
6158 Dispenser: soap antiseptic Furniture/ Fitting 2 1 to basin
19810 Shelf: SS, over Metalwork 1 1 over sink bench
19820 Shelf: SS, under Metalwork 1 1 under sink bench
21950 Suction adapter Furniture/ Fitting 3 1 for tube cleaning
24100 Waste bin: paper, 20 Litre Furniture/ Fitting 3 1 to basin
24125 Waste bin: clinical Furniture/ Fitting 3 1
ID Description Grp Qty Ele Data CdW HtW WmW Tap Dns Gas Selection / Remarks
2800 Basin: handwash, Type B 1 1 ___ ___ yes ___ yes yes yes ___
45601 Hose: spray 1 1 ___ ___ yes yes ___ ___ ___
49100 Sink: 750x500x300D 1 1 ___ ___ yes opt opt yes yes ___ hot water
49800 Sink: flushing rim 1 1 ___ ___ yes opt ___ ___ yes ___ in bench
52450 Steriliser: low temperature, peracetic acid 3 1 yes ___ yes yes ___ ___ yes ___ optional
ID Description Service Category Qty Selection / Remarks
4000 Hot water: outlet Hydraulics 1 for low temp steriliser, optional
4010 Cold water: outlet Hydraulics 1 for low temp steriliser, optional
4033 Floor waste Hydraulics 1
4037 Tundish drain Hydraulics 1 for low temp steriliser, optional
5000 Airconditioning HVAC
5019 Exhaust HVAC efficient exhaust required
6000 General fluorescent Lighting
6055 Special: task light, built in Lighting 1 under O/H cupboards
7020 Medical Air (MA) Medical Gases 1 over dry bench for tube drying
7040 Suction Medical Gases 1 near sink for tube cleaning
9001 GPO: Double Power 1 over bench
9011 GPO: Emergency power, double Power 1 over bench
9060 GPO: Special: for equipment Power 1 optional, for low temp steriliser
Other Documents
Buy an edible AutoCAD DWG Room Layout Sheet (RLS) for this standard component. $2.99
0 0